I really need to find a good cheese cutter - knife, wire, whatever
works best. Anyone have a recommendation for one for everyday service,
not "pretty" for company, just a work horse. I've often used my boning
knife on the harder cheeses, such as cheddar (which Bill has every day
in his lunch) because it creates less drag, and I've actually cut
myself with the *back* of the blade a time or two when I was a bit
careless. Time to find a dedicated weapon.

Terry "Squeaks" Pulliam Burd

--

"If the soup had been as warm as the wine,
if the wine had been as old as the turkey,
and if the turkey had had a breast like the maid,
it would have been a swell dinner." Duncan Hines


To reply, remove "spambot" and replace it with "cox"

Terry Pulliam Burd > wrote:

>I really need to find a good cheese cutter - knife, wire, whatever
>works best. Anyone have a recommendation for one for everyday service,
>not "pretty" for company, just a work horse. I've often used my boning
>knife on the harder cheeses, such as cheddar (which Bill has every day
>in his lunch) because it creates less drag, and I've actually cut
>myself with the *back* of the blade a time or two when I was a bit
>careless. Time to find a dedicated weapon.

I almost always use a regular butterknife (a.k.a. table setting knife) from
our silverware set for slicing cheese. Cheese does not require a sharp
knife (with some exceptions), and all using a good kitchen knife
(such as a boning knife) does is dull the knife really fast.

This does not work for a very hard aged cheese, however.

Steve

On 2010-07-25, Terry Pulliam Burd > wrote:

> not "pretty" for company, just a work horse. I've often used my boning
> knife on the harder cheeses, such as cheddar.....

The thinner the blade, the less resistance and sticking. Wire is
good, but beware. I paid big bucks for a wire "slicer" with all
stainless steel base and handle and wire and....

The freakin' wire unraveled rendering the whole shebang useless. It
came with an extra wire, but so what!? PIA!!

nb

On Jul 24, 9:09*pm, Terry Pulliam Burd > wrote:
> I really need to find a good cheese cutter - knife, wire, whatever
> works best. Anyone have a recommendation for one for everyday service,
> not "pretty" for company, just a work horse. I've often used my boning
> knife on the harder cheeses, such as cheddar (which Bill has every day
> in his lunch) because it creates less drag, and I've actually cut
> myself with the *back* of the blade a time or two when I was a bit
> careless. Time to find a dedicated weapon.
>
> Terry "Squeaks" Pulliam Burd
>
> --
>
> "If the soup had been as warm as the wine,
> if the wine had been as old as the turkey,
> and if the turkey had had a breast like the maid,
> it would have been a swell dinner." Duncan Hines
>
> To reply, remove "spambot" and replace it with "cox"


Probably the best choice is a cheese knife - curved blade with lots of
holes in it to reduce drag.

I also own the planer and the wire type.

On Sat, 24 Jul 2010 18:09:09 -0700, Terry Pulliam Burd
> wrote:

>I really need to find a good cheese cutter - knife, wire, whatever
>works best. Anyone have a recommendation for one for everyday service,
>not "pretty" for company, just a work horse. I've often used my boning
>knife on the harder cheeses, such as cheddar (which Bill has every day
>in his lunch) because it creates less drag, and I've actually cut
>myself with the *back* of the blade a time or two when I was a bit
>careless. Time to find a dedicated weapon.
>
>Terry "Squeaks" Pulliam Burd


You know that everything under the sun is on the Internet these days..
there are a lot of options at this link.

http://www.cheeseslicing.com/site/681068/page/45029

My favorite wire cutter is nowhere to be found for sale online. I got
it from Martha Stewart's offerings many years ago and it is similar
to, but not quite like this:

http://www.cooking.com/products/shpr...=FROOGLE694563

Mine had 3 wires (the above has 2), each for a different thickness of
cutting cheeses. It is by Amco, is stainless and quite hefty. I can
find a photo, but no availability, dang it. Perhaps someone knows if
it is still sold.

http://www.amazon.com/Amco-10167-Tri.../dp/B00004RFIZ

Boron

On Sat, 24 Jul 2010 21:37:05 -0400, Boron Elgar
> wrote:

> Mine had 3 wires (the above has 2), each for a different thickness of
> cutting cheeses. It is by Amco, is stainless and quite hefty. I can
> find a photo, but no availability, dang it. Perhaps someone knows if
> it is still sold.

I've never used more wire than just a single one. I thought the whole
trick to thickness was the angle of the roller to the wire.

--

Forget the health food. I need all the preservatives I can get.

On Sat, 24 Jul 2010 22:00:10 -0700, sf > wrote:

>On Sat, 24 Jul 2010 21:37:05 -0400, Boron Elgar
> wrote:
>
>> Mine had 3 wires (the above has 2), each for a different thickness of
>> cutting cheeses. It is by Amco, is stainless and quite hefty. I can
>> find a photo, but no availability, dang it. Perhaps someone knows if
>> it is still sold.
>
>I've never used more wire than just a single one. I thought the whole
>trick to thickness was the angle of the roller to the wire.


The one I use is a bit unusual and the wires so taut, even after all
these years of use, that one can truly use the 3 sides (the handle is
triangular) to vary the thickness.

In single wire cutters I have had, either adjustable wire with roller
or "freestanding" wire, indeed, the thickness is controlled by the
hand movements. It is one of the things I adore about this cutter.

When I went to dig out this thing to get the brand name, I realized
just how many cheese cutter I had..not just the wire ones (3 of them),
but two full sets of knives that have blades particular to types of
cheese.

Did I mention we're very fond of cheese at this house?

Boron

On Sun, 25 Jul 2010 08:53:12 -0400, Boron Elgar
> wrote:

>
> Did I mention we're very fond of cheese at this house?

Sounds like it!

My husband was a cheese hound too. He thought he was fine because he
was in shape and not overweight. Guess who ended up with high
cholesterol and a serious heart problem? It wasn't me. So whatever
you do, be careful.

--

Forget the health food. I need all the preservatives I can get.

sf > wrote:

>My husband was a cheese hound too. He thought he was fine because he
>was in shape and not overweight. Guess who ended up with high
>cholesterol and a serious heart problem? It wasn't me. So whatever
>you do, be careful.

My last HDL reading was lower than I would like. I'm looking for
dietary ways to improve it. Anyone have any ideas?


Steve

On Sun, 25 Jul 2010 09:26:03 -0700, sf > wrote:

>On Sun, 25 Jul 2010 08:53:12 -0400, Boron Elgar
> wrote:
>
>>
>> Did I mention we're very fond of cheese at this house?
>
>Sounds like it!
>
>My husband was a cheese hound too. He thought he was fine because he
>was in shape and not overweight. Guess who ended up with high
>cholesterol and a serious heart problem? It wasn't me. So whatever
>you do, be careful.

I balance my cheese nibbling with Lipitor.

Actually, I am genetically fortunate and have low cholesterol and an
amazing LDL/HDL ratio. My brother, though, had a heart attack at 58,
so I take the Lipitor as a preventive (I am a diabetic, too).

Boron

On Sat, 24 Jul 2010 21:37:05 -0400, Boron Elgar
> wrote:

>You know that everything under the sun is on the Internet these days..
>there are a lot of options at this link.

<snip>

Your post inspired me to google around for wire-based cheese cutters.
In the one-thing-leads-to-another department, a mandoline popped up.
Snap! I buzzed into the kitchen (Bill's sitting at the counter,
blearily reading the Sunday paper) and grabbed my Oxo hand mandoline
(which is handy as hell, BTW) and the tag end of cheddar in the
reefer. I ran off a few slices, all the while Bill is (blearily)
watching me with a "WTF" expression on his face. When I told him my
cheese slicer search saga, his only comment on the cheese slices was,
"It's not even." It rolls off thicker on one side than the other. The
man has a serious case of OCD with Certain Things and this is one of
them. His law partner wandered into his office one day while he was
eating the lunch I'd made him, and he had about a dozen Wheat Thins
spread out with an equal number of cheddar cheese squares perched on
each, in military ranks, as it were. And that's just crackers and
cheese. You oughta see his closet... (former Marine and never got over
it).

Oh, and I've ordered
http://www.amazon.com/R%C3%B6sle-127...0079779&sr=1-6

The Amco in your post was unavailable, but thanks for the idea!

Terry "Squeaks" Pulliam Burd

--

"If the soup had been as warm as the wine,
if the wine had been as old as the turkey,
and if the turkey had had a breast like the maid,
it would have been a swell dinner." Duncan Hines


To reply, remove "spambot" and replace it with "cox"

Terry Pulliam Burd wrote:

> On Sat, 24 Jul 2010 21:37:05 -0400, Boron Elgar
> wrote:
>
>
> >You know that everything under the sun is on the Internet these days..
> >there are a lot of options at this link.
>
>
>
>
> Your post inspired me to google around for wire-based cheese cutters.
> In the one-thing-leads-to-another department, a mandoline popped up.
> Snap! I buzzed into the kitchen (Bill's sitting at the counter,
> blearily reading the Sunday paper) and grabbed my Oxo hand mandoline
> (which is handy as hell, BTW) and the tag end of cheddar in the
> reefer. I ran off a few slices, all the while Bill is (blearily)
> watching me with a "WTF" expression on his face. When I told him my
> cheese slicer search saga, his only comment on the cheese slices was,
> "It's not even." It rolls off thicker on one side than the other. The
> man has a serious case of OCD with Certain Things and this is one of
> them. His law partner wandered into his office one day while he was
> eating the lunch I'd made him, and he had about a dozen Wheat Thins
> spread out with an equal number of cheddar cheese squares perched on
> each, in military ranks, as it were. And that's just crackers and
> cheese. You oughta see his closet... (former Marine and never got over
> it).
>
> Oh, and I've ordered
> http://www.amazon.com/R%C3%B6sle-127...0079779&sr=1-6
>
> The Amco in your post was unavailable, but thanks for the idea!
>
> Terry "Squeaks" Pulliam Burd
>
Hmmmm.....i have one of those wire cheese cutters, have had for years,
but, i used to think it was a shame that it made uneven and rather thick
slices, great for griled cheese & cheeseburgers and cooking but not so
good for thin sandwich slices.

Then after a good 5 years or more of use i some how became suddenly
aware of the slice size setting mechanism for adjusting slice thickness

But then im former USN and even though FMSS'ed i guess it did'nt take


--

Mr. Joseph Paul Littleshoes Esq.

Domine, dirige nos.

Let the games begin!
http://fredeeky.typepad.com/fredeeky.../sf_anthem.mp3

Terry Pulliam Burd > wrote in
:

> I really need to find a good cheese cutter - knife, wire, whatever
> works best. Anyone have a recommendation for one for everyday service,
> not "pretty" for company, just a work horse. I've often used my boning
> knife on the harder cheeses, such as cheddar (which Bill has every day
> in his lunch) because it creates less drag, and I've actually cut
> myself with the *back* of the blade a time or two when I was a bit
> careless. Time to find a dedicated weapon.
>


We just use our old bone handled bread and butter knives. (Only 'sharp' on
one side ;-)


But if the cheese is that hard you're needing to stick your fingers on top of
the knife to force it through, you need to let it come to room temp for a lot
longer. I leave all my cheeses out for at least 2-3 hours (sometimes longer
depending on outside temp) before serving.


But for hard cheeses like your cheddar, straight out of the fridge, just use
a *one sided* sharp knife..... or a heavy 'chinese' chopper.




--
Peter Lucas
Brisbane
Australia

I didn't fight my way to the top of the food chain to be a vegetarian.

On Jul 24, 9:45*pm, PL > wrote:
> Terry Pulliam Burd > wrote :
>
> > I really need to find a good cheese cutter - knife, wire, whatever
> > works best. Anyone have a recommendation for one for everyday service,
> > not "pretty" for company, just a work horse. I've often used my boning
> > knife on the harder cheeses, such as cheddar (which Bill has every day
> > in his lunch) because it creates less drag, and I've actually cut
> > myself with the *back* of the blade a time or two when I was a bit
> > careless. Time to find a dedicated weapon.
>
> We just use our old bone handled bread and butter knives. (Only 'sharp' on
> one side ;-)
>
> But if the cheese is that hard you're needing to stick your fingers on top of
> the knife to force it through, you need to let it come to room temp for a lot
> longer. I leave all my cheeses out for at least 2-3 hours (sometimes longer
> depending on outside temp) before serving.
>
> But for hard cheeses like your cheddar, straight out of the fridge, just use
> a *one sided* sharp knife..... or a heavy 'chinese' chopper.
>
> --
> Peter Lucas
> Brisbane
> Australia
>
> I didn't fight my way to the top of the food chain to be a vegetarian.

==
Commercially, I used to use steel piano wire and a hardwood dowel to
cut 10 lb. blocks of well aged cheddar. Even when cold this worked for
me and I cut up one pile of cheese every week.
==

>Terry Pulliam Burd wrote:
>
>> I really need to find a good cheese cutter - knife, wire, whatever
>> works best. Anyone have a recommendation for one for everyday service,
>> not "pretty" for company, just a work horse. I've often used my boning
>> knife on the harder cheeses, such as cheddar (which Bill has every day
>> in his lunch) because it creates less drag, and I've actually cut
>> myself with the *back* of the blade a time or two when I was a bit
>> careless. Time to find a dedicated weapon.

You're obviously a low class no account hoggish whore. Regardless how
hard the cheese don't be such a ****ing PIG... simply cut smaller
slices, not thinner, just not the entire area of the cheese, cut half
slices or third slices, cut at an angle alternately from each side of
the block/wedge... an ordinary paring knife will do... stop hacking
off full slabs, demonstrate some daintiness, you uncouth beastie.
Don't yoose have any common sense... sheesh, I gotta teach yoose
moroons everything... does yer mommy still gotta cut your food on yer
plate... must be embarrassing dining out with you. I bet you're one
of those drooling pinheads who hacks into the middle of a stick of
butter, like it's all yours, with no consideration for others with the
mess you leave... typical snobbish JAP, I bet you don't flush the
toilet.

On Sat, 24 Jul 2010 18:09:09 -0700, Terry Pulliam Burd
> wrote:

> I really need to find a good cheese cutter - knife, wire, whatever
> works best. Anyone have a recommendation for one for everyday service,
> not "pretty" for company, just a work horse. I've often used my boning
> knife on the harder cheeses, such as cheddar (which Bill has every day
> in his lunch) because it creates less drag, and I've actually cut
> myself with the *back* of the blade a time or two when I was a bit
> careless. Time to find a dedicated weapon.
>
I just use my french chef's knife, nothing fancy. It worked just fine
on some aged Gouda this week. The trick is to cut thin slices with a
sharp knife.

--

Forget the health food. I need all the preservatives I can get.

For thin slices of cheese, I use a Wusthof cheese plane, it works great
but the cheese is very thin.. For thicker slices, I use a KitchenAid
Professional cheese slicer, it is a wire.

Becca

"Terry Pulliam Burd" wrote

> really need to find a good cheese cutter - knife, wire, whatever
> works best. Anyone have a recommendation for one for everyday service,
> not "pretty" for company, just a work horse. I've often used my boning

I use something like this:

http://www.amazon.com/Anolon-52201-C...0080507&sr=8-3

Or: http://tinyurl.com/345xrnk

Thats simple and works for most of my needs. I have several of them.

cshenk wrote:
> "Terry Pulliam Burd" wrote
>
>> really need to find a good cheese cutter - knife, wire, whatever
>> works best. Anyone have a recommendation for one for everyday service,
>> not "pretty" for company, just a work horse. I've often used my boning
>
> I use something like this:
>
> http://www.amazon.com/Anolon-52201-C.../ref=sr_1_3?ie
=UTF8&s=home-garden&qid=1280080507&sr=8-3
>
> Or: http://tinyurl.com/345xrnk
>
> Thats simple and works for most of my needs. I have several of them.
>
>

http://thecheeseknife.com/

This really works. No, I don't work the company.

Steve

Steve Clingerman > wrote in
:

> http://thecheeseknife.com/
>
> This really works. No, I don't work the company.
>
> Steve

Interesting.

Thanks

In article >,
Terry Pulliam Burd > wrote:

> I really need to find a good cheese cutter - knife, wire, whatever
> works best. Anyone have a recommendation for one for everyday service,
> not "pretty" for company, just a work horse. I've often used my boning
> knife on the harder cheeses, such as cheddar (which Bill has every day
> in his lunch) because it creates less drag, and I've actually cut
> myself with the *back* of the blade a time or two when I was a bit
> careless. Time to find a dedicated weapon.
>
> Terry "Squeaks" Pulliam Burd

I really really do like my cheese board with a wire cutter:

<http://i32.tinypic.com/2mguov5.jpg>

Dad held the "blade" up for me as I photographed it.
--
Peace! Om

Web Albums: <http://picasaweb.google.com/OMPOmelet>
Only Irish coffee provides in a single glass all four essential food groups: alcohol, caffeine, sugar and fat. --Alex Levine