General Cooking (rec.food.cooking) For general food and cooking discussion. Foods of all kinds, food procurement, cooking methods and techniques, eating, etc.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 10
Default Dormeyer Silver Chef Stand Mixer parts

It is a defunct company. Does anyone know if any modern mixers parts are
compatible? I want some dough hooks.

--
Brian (not wanting to be a messiah): "You are all individuals..."
Crowd (in unison): "We are all individuals..."
Monty Python's "Life Of Brian"
http://www.spampoison.com

  #2 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 9,551
Default Dormeyer Silver Chef Stand Mixer parts

On Sep 16, 12:24?pm, postingprofile > wrote:
> It is a defunct company. Does anyone know if any modern mixers parts are
> compatible?


There are quite a few at ebay with beatters and other attachments but
none are shown with dough hooks... probably never made dough hooks for
such a small appliance. You can easily check if the newer Sunbeam
dough hook shaft is compatible but likely not.

http://search.ebay.com/dormeyer

> I want some dough hooks.


That machine probably hasn't the power to knead dough... even if you
can find hooks that fit a ball of dough will probably kill its motor,
gearing, both. To be perfectly frank with the miniscule quantity of
dough a machine of that small a capacity can handle you have much
better dough hooks at the ends of your arms.

Sheldon

  #3 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 10
Default Dormeyer Silver Chef Stand Mixer parts

On Sun, 16 Sep 2007 10:29:36 -0700, Sheldon wrote:

>
> That machine probably hasn't the power to knead dough... even if you
> can find hooks that fit a ball of dough will probably kill its motor,
> gearing, both. To be perfectly frank with the miniscule quantity of
> dough a machine of that small a capacity can handle you have much
> better dough hooks at the ends of your arms.


It came with a meat grinder and juicer, wouldn't that indicate some power?
>
> Sheldon


--
Brian (not wanting to be a messiah): "You are all individuals..."
Crowd (in unison): "We are all individuals..."
Monty Python's "Life Of Brian"
http://www.spampoison.com

  #4 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 9,551
Default Dormeyer Silver Chef Stand Mixer parts

On Sep 16, 1:42?pm, postingprofile > wrote:
> On Sun, 16 Sep 2007 10:29:36 -0700, Sheldon wrote:
>
> > That machine probably hasn't the power to knead dough... even if you
> > can find hooks that fit a ball of dough will probably kill its motor,
> > gearing, both. To be perfectly frank with the miniscule quantity of
> > dough a machine of that small a capacity can handle you have much
> > better dough hooks at the ends of your arms.

>
> It came with a meat grinder and juicer, wouldn't that indicate some power?



I was going to mention that but thought, um, this guy seems to have a
decent IQ so I didn't. Since you thought to ask I'm surprised you
didn't immediately realize that the PTO to power those attachments is
geared substantially lower than the bottom gearing used for beaters.
And those old machines didn't have electronic controllers like today's
modern units. Even with modern home style mixers you still need to
use the lower speed settings with dough hooks or the overload switch
will trip, but the electronics compensate up to a point for loss of
power at slower speeds.

My recommendation is to forget about dough hooks for that machine...
doesn't even seem to be a paddle available, just beaters, must be good
reason.... probably has less capability than today's high end hand
mixers. My Kitchenaid 7 speed hand mixer is fairly new, has an
electronic controller that maintains equal power over all speeds.
There are no dough hooks available but I can buy heavy duty beaters
(essentially just larger diameter beater wires) for mixing heavier
ingredients like cookie doughs, but I didn't buy this mixer for that
use and I think such heavy use will over load and shorten it's life...
I use it almost exclusively for beating batters, and the occassional
whipping job.. This appliance works great for beating and whipping
anything, stores in a drawer and I don't need to use any special
bowls, it'll work with any container thats large enough to fit it's
beaters, so for my use it pretty much has the same capacity of a 5 qt
KA stand mixer. I don't bake any large quantities of bread anymore so
I either use my ABM or my hands. I never owned a stand mixer the size
of the typical KA, no mixer that size can mix any more dough than I
can by hand... wait a minute, yes I did, for many years I had custody
of my mother's ancient Sunbeam but I never used it even once, was
still in its carton when I donated it to the salvation army store. I
used to own a 12 quart Hobart that I bought used many years ago but
since I didn't use it in over 20 years when I moved here about five
years ago I sold it... I really have no space in my new kitchen and it
would just be a dust collector anyway. If you need to knead dough for
five pounds of bread or less (and you're not handicapped) I suggest
you use those dough hooks at the ends of your arms... in fact no
machine made can knead dough better than the human hand... I can't
imagine that anyone who isn't somehow handicapped can't easily knead
dough enough for a two pound loaf.

Sheldon

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
LF replacement parts for a Philips HR 7805/A Combo Stand Mixer, FoodProcessor & Blender [email protected] Cooking Equipment 9 03-08-2018 04:14 PM
Stand mixer limey Cooking Equipment 4 15-07-2005 01:00 AM
Stand mixer limey General Cooking 3 15-07-2005 12:51 AM
Best stand mixer? GingerRose Baking 11 27-07-2004 03:05 PM
Stand Mixer jmk Cooking Equipment 7 14-04-2004 01:28 AM


All times are GMT +1. The time now is 06:14 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 FoodBanter.com.
The comments are property of their posters.
 

About Us

"It's about Food and drink"