General Cooking (rec.food.cooking) For general food and cooking discussion. Foods of all kinds, food procurement, cooking methods and techniques, eating, etc.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 1,861
Default jaccard meat tenderizer as by requst

I bought a jaccard meat tenderizer today and said so in the chat
room....notbob wanted a report. Cost me around 44 dollars Canadian. It
was a late xmas present to myself.


I got the rectangular 16 pin/knife model. And it comes with a plastic
cover/shield to protect the blades and you...that shield is a pain as it
fits on only one way.

The first thing I discovered is it is very sharp and penetrates meat well
as the punctures in my thumb prove.

I ran it over a pork steak I plan on eating tomorrow for supper...it was
quite easy to use and very little effort was required to get maxium
penetration. I punched hundreds of holes in the steak on both sides of
the steak quickly and easily. It was a little difficult to puncture the
meat near the bone though.

I then seasoned the steak on one side with granulated garlic and fresh
black pepper and put it back in the fridge as I'll be cooking it
tomorrow. This will show if it is true about absorbing the spices... well
kinda.

On to the cleaning....It is dishwasher safe but the working end of the
pins/knives are covered inside the base and won't clean well in the
dishwasher in my oppinion...so I hand washed it. There are too many nooks
and creavaces to tell you it cleans fast and easy with a simple quick
rinse. But with soap, water and a sponge it cleaned fairly
easily....holding down the plastic base to clean off the pins/knife
blades is a bit tricky but can be done with little or nor further
punctures of your fingers if you go slowly.

So far I am impressed by its ease of use and puncture
capibilities...Tomorrow will be the true test though. Now where are those
bandaids?
  #2 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 10,962
Default jaccard meat tenderizer as by requst

Mr Libido Incognito said...

> On to the cleaning....It is dishwasher safe but the working end of the
> pins/knives are covered inside the base and won't clean well in the
> dishwasher in my oppinion...so I hand washed it. There are too many nooks
> and creavaces to tell you it cleans fast and easy with a simple quick
> rinse. But with soap, water and a sponge it cleaned fairly
> easily....holding down the plastic base to clean off the pins/knife
> blades is a bit tricky but can be done with little or nor further
> punctures of your fingers if you go slowly.



Mr. Libido Incognito,

Do yourself a favor and return it and get the jaccard that can be
disassembled for rapid and safe cleaning. You'll thank me later and you can
cut back on the frustration and bandaids.

Andy
  #3 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 14,587
Default jaccard meat tenderizer as by requst

On 2007-01-07, Andy <q> wrote:
>
> Do yourself a favor and return it and get the jaccard that can be
> disassembled for rapid and safe cleaning.


What? ...they got the "hard to clean" and "easy to clean" models? WTF?

LibInc: buy yourself a dishwashing brush. I use them almost
exclusively, now, and recommend them highly for almost all dishwashing
chores.

nb
  #4 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 9,551
Default jaccard meat tenderizer as by requst


notbob wrote:
> Andy <q> wrote:
> >
> > Do yourself a favor and return it and get the jaccard that can be
> > disassembled for rapid and safe cleaning.

>
> What? ...they got the "hard to clean" and "easy to clean" models? WTF?


The easy clean model is two dinner forks, one in each hand.

  #5 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 1,303
Default jaccard meat tenderizer as by requst

On Sun, 07 Jan 2007 05:49:22 -0600, notbob > wrote:

>On 2007-01-07, Andy <q> wrote:
>>
>> Do yourself a favor and return it and get the jaccard that can be
>> disassembled for rapid and safe cleaning.

>
>What? ...they got the "hard to clean" and "easy to clean" models? WTF?
>
>LibInc: buy yourself a dishwashing brush. I use them almost
>exclusively, now, and recommend them highly for almost all dishwashing
>chores.


I don't know what LibInc: means, but I concur with the recommendation.
We have 3 brushes: one for general use, one for veg, one for the
dog's/cat's dishes. Saves a manicure, no?

TammyM


  #6 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 1,861
Default jaccard meat tenderizer as by requst

TammyM wrote on 07 Jan 2007 in rec.food.cooking

> On Sun, 07 Jan 2007 05:49:22 -0600, notbob > wrote:
>
> >On 2007-01-07, Andy <q> wrote:
> >>
> >> Do yourself a favor and return it and get the jaccard that can be
> >> disassembled for rapid and safe cleaning.

> >
> >What? ...they got the "hard to clean" and "easy to clean" models?

WTF?
> >
> >LibInc: buy yourself a dishwashing brush. I use them almost
> >exclusively, now, and recommend them highly for almost all dishwashing
> >chores.

>
> I don't know what LibInc: means, but I concur with the recommendation.
> We have 3 brushes: one for general use, one for veg, one for the
> dog's/cat's dishes. Saves a manicure, no?
>
> TammyM


Actually this jaccard comes apart... the base slides apart and the
pin/blades can be unlocked and removed. By sliding the jaccard name plate
over and pushing the blade up thru the top of the handle part. But it is
easier to just hold the spring loaded base up so the hidden blade tips
are exposed and wipe those with a damp sponge. It's the base that has
cracks and creavices which is the true pain to wash/clean. I will, in the
future, slide the base apart to wash... to allow for better drying as it
was still water logged this morning when I slid it apart.

I have always found disassembling stuff too often causes wear and
shortens it's life span. And I plan on using this a fair bit. Still I
wish there were less nooks and crannies in the base part.
  #7 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 5,762
Default jaccard meat tenderizer as by requst


"TammyM" > wrote

> I don't know what LibInc: means,


Libido Incognito.

nancy


  #8 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 10,852
Default jaccard meat tenderizer as by requst

In article >,
Mr Libido Incognito > wrote:

> I bought a jaccard meat tenderizer today and said so in the chat
> room....notbob wanted a report. Cost me around 44 dollars Canadian. It
> was a late xmas present to myself.
>
>
> I got the rectangular 16 pin/knife model. And it comes with a plastic
> cover/shield to protect the blades and you...that shield is a pain as it
> fits on only one way.
>
> The first thing I discovered is it is very sharp and penetrates meat well
> as the punctures in my thumb prove.
>
> I ran it over a pork steak I plan on eating tomorrow for supper...it was
> quite easy to use and very little effort was required to get maxium
> penetration. I punched hundreds of holes in the steak on both sides of
> the steak quickly and easily. It was a little difficult to puncture the
> meat near the bone though.
>
> I then seasoned the steak on one side with granulated garlic and fresh
> black pepper and put it back in the fridge as I'll be cooking it
> tomorrow. This will show if it is true about absorbing the spices... well
> kinda.
>
> On to the cleaning....It is dishwasher safe but the working end of the
> pins/knives are covered inside the base and won't clean well in the
> dishwasher in my oppinion...so I hand washed it. There are too many nooks
> and creavaces to tell you it cleans fast and easy with a simple quick
> rinse. But with soap, water and a sponge it cleaned fairly
> easily....holding down the plastic base to clean off the pins/knife
> blades is a bit tricky but can be done with little or nor further
> punctures of your fingers if you go slowly.
>
> So far I am impressed by its ease of use and puncture
> capibilities...Tomorrow will be the true test though. Now where are those
> bandaids?


I have one and I love it. :-) I reserve it for tough beef, like sirloin.

Use a brush on the blade tips, it's easier.
--
Peace, Om

Remove _ to validate e-mails.

"My mother never saw the irony in calling me a Son of a bitch" -- Jack Nicholson
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meat Tenderizer [email protected] Barbecue 46 08-11-2010 03:11 PM
Powdered meat tenderizer? JW[_1_] General Cooking 11 07-04-2010 06:23 PM
Finally put my Jaccard meat tenderizer to use! Andy General Cooking 22 29-08-2006 03:31 AM
Jaccard meat tenderizer, true or false? Andy General Cooking 6 24-10-2005 03:38 PM
Meat tenderizer MH Cooking Equipment 2 18-11-2004 05:48 PM


All times are GMT +1. The time now is 03:52 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FoodBanter.com.
The comments are property of their posters.
 

About Us

"It's about Food and drink"