Bob Terwilliger wrote:
>
> Squeaks wrote:
>
> > I have never been happy with one aspect of my KA stand mixer: the flat
> > beater doesn't clean the sides or bottom of the bowl. I have to stop it
> > periodically and run a rubber spatula down the sides and bottom to bring
> > in the unincorporated ingredients. It also makes a clanging noise, but I
> > can't figure out what it could possibly be clanging *against* if it's not
> > cleaning the bottom or sides of the bowl. The manual says it's "adjusted
> > at the factory so that the flat beater just clears the bottom of the bowl"
> > and then gives instructions for adjusting the clearance if it's too far
> > away from the bowl, which it appears to be, *but* what's making the
> > clanging sound?
> >
> > I will cheerfully admit that I am the least mechanically ept person I know
> > (my boss is ever alert to my occasional physical assaults on various
> > pieces of recalcitrant office equipment, as my "fix-it" repertoire is
> > limited to giving the offending equipment a good whack). But given the
> > "clanging," dare I use the suggested method of turning the screw slightly
> > to the right? And how "slight" is "slightly"? 1/4 turn? 1/2 turn? I have
> > visions of getting it so utterly out of plumb that I might as well throw
> > it out and start over ;-D
>
> The problem is endemic to KitchenAid mixers. An enterprising manufacturer is
> taking advantage of that problem by selling a beater which *will* clean the
> sides of the bowl:
>
> http://www.amazon.com/exec/obidos/tg...l/-/B0015TMHFG
>
> Bob

Yep, there are a few new-fangled 'beaters' with silicone-like baffles
that will fit the stand mixer, subject to the specific model. Check
around because the prices vary significantly.

Sky

--
Ultra Ultimate Kitchen Rule - Use the Timer!
Ultimate Kitchen Rule -- Cook's Choice

On Feb 26, 2:30*am, Sky > wrote:
> Bob Terwilliger wrote:
>
> > Squeaks wrote:
>
> > > I have never been happy with one aspect of my KA stand mixer: the flat
> > > beater doesn't clean the sides or bottom of the bowl. I have to stop it
> > > periodically and run a rubber spatula down the sides and bottom to bring
> > > in the unincorporated ingredients. It also makes a clanging noise, but I
> > > can't figure out what it could possibly be clanging *against* if it's not
> > > cleaning the bottom or sides of the bowl. The manual says it's "adjusted
> > > at the factory so that the flat beater just clears the bottom of the bowl"
> > > and then gives instructions for adjusting the clearance if it's too far
> > > away from the bowl, which it appears to be, *but* what's making the
> > > clanging sound?
>
> > > I will cheerfully admit that I am the least mechanically ept person I know
> > > (my boss is ever alert to my occasional physical assaults on various
> > > pieces of recalcitrant office equipment, as my "fix-it" repertoire is
> > > limited to giving the offending equipment a good whack). But given the
> > > "clanging," dare I use the suggested method of turning the screw slightly
> > > to the right? And how "slight" is "slightly"? 1/4 turn? 1/2 turn? I have
> > > visions of getting it so utterly out of plumb that I might as well throw
> > > it out and start over ;-D
>
> > The problem is endemic to KitchenAid mixers. An enterprising manufacturer is
> > taking advantage of that problem by selling a beater which *will* clean the
> > sides of the bowl:
>
> >http://www.amazon.com/exec/obidos/tg...l/-/B0015TMHFG
>
> > Bob
>
> Yep, there are a few new-fangled 'beaters' with silicone-like baffles
> that will fit the stand mixer, subject to the specific model. *Check
> around because the prices vary significantly.
>
> Sky
>
> --
> Ultra Ultimate Kitchen Rule - Use the Timer!
> Ultimate Kitchen Rule -- Cook's Choice- Hide quoted text -
>
> - Show quoted text -

For the 5 Qt. bowl lift model, $29.95 or thereabouts is the only price
I found among 6 or 7 vendors. Not too much difference, I'd say. The
tilt-head mixer model beaters are about $5 less.

N.