Non-removable Mixing Blade Bread Machine?
On Wed, 03 Dec 2003 17:45:27 GMT, "weft2" > wrote:
>I inherited a used bread machine pan from a somewhat older B&D Breadmaking
>machine (Don't know the model and the original owner of the machine isn't
>around), and I can't remove the blue mixing blade from the shaft. It's been
>oiled, and soaked in water, though there never appeard to be anything
>sticking to it. Then I looked at the blade top more carefully, and instead
>of a half moon hole at the top of the blade (where it fits onto the shaft
>(the shaft, also usually with a half moon shape, but I can't tell this
>time), there's a small diagonal cutting accross the half moon on the blade,
>as if to prevent it from removal. Has anyone heard of non-removable bread
>machine blades/paddles before?
>This one has me stumped, because no amt. of force will remove it, unlike
>other ones that will come up with a good soaking. The blade rotates just
>fine, BTW, so again, I'm thinking this is a permanent blade. Thanks for any
>info.
>
I had a B& D of the type you describe- it actually would be best
called semi-removable. The shaft actually allowed the blade to twist
a tiny bit onto a nub at the top of the shaft that kept it from coming
off when you extract the loaf. Often a bit of dry flour would get
wedged in the slot, or a ring of well cooked bread would form under
the blade next to the pan We would fill the pan with enough water to
clover the blade-shaft area, and leave it for an hour or more when the
blade had not been cleaned under for a while, and looked like it
needed it. Then, holding the blade in one hand, and the underside of
pan shaft drive ears in the other try to twist in the opposite
direction to the way that the blade normally rotates.
Another soak is sometimes needed, for the first effort sometimes just
loosens up enough space in the compacted flour to allow more water to
penetracte and really loosen things up so that the blade can rotate
back on the shaft and be removed. Removing it after every laof, and
cleaning the shaft and blade hole will keep the clump from building up
after that.
|