Home |
Search |
Today's Posts |
![]() |
|
Winemaking (rec.crafts.winemaking) Discussion of the process, recipes, tips, techniques and general exchange of lore on the process, methods and history of wine making. Includes traditional grape wines, sparkling wines & champagnes. |
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
|||
![]() "Michael Brill" > wrote in message om... > The goal was to minimize oxygen contact. So I took the strainer (it's > about a foot deep) and pushed it down into/through the cap and then > put a hose into the strainer to rack out. The only oxygen contact was > the very top of the strainer. The strainer kept things like seeds and > skins out. I think this was way less oxygen then putting it through a > press. I also racked most of it into barrel a bit sweet (about 2-3 > brix) for extra protection. At that stage of the process, the wine can actually benefit from a bit of aeration/splashing. That helps to release the dissolved CO2, as well as the traces of H2S that are produced in all fermentations. Once the wine is in barrel it becomes more important to guard against air exposure, although big, tannic reds are less sensitive than Pinot Noir. From what I've gleaned from your comments in this thread, it sounds like you went into barrel rather dirty. I'd recommend that you rack now or very soon to get the wine off its gross lees. Leaving all that vegetable matter in there won't improve your wine, and you may find the opposite true when it is too late. Be sure to sulfite if ML is finished. My 2¢ worth. Tom S |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
A question about lees | Winemaking | |||
gross lees vs. fine lees and when to rack | Winemaking | |||
lees stirring during MLF | Winemaking | |||
lees stirring | Winemaking |