On Jul 20, 7:26*pm, "Edwin Pawlowski" > wrote:
> "Eric" > wrote in message
>
> I made a sketch - its not the greatest, but here it goes. What do you
> think about the design below? It is similar to what the manual wants,
> but modified for my application. The grill-head can vent into the left
> and right chambers. The right chamber has the LP Tank. Both chambers
> have two rear vents. The LP tank access door is also louvered. This
> leaves the seatwall, the area directly under/behind the grillhead, and
> the left-most portion of the island (under the round bar) sealed with
> no vents (and they shouldnt be needed, since the propane wont enter
> those sealed areas and will vent out the other provided paths).
>
> http://i232.photobucket.com/albums/e...and_design.jpg
>
> ******************************************
>
> Looks like it should work. *What is directly below the grill head? Is that
> sealed? *If not I'd put the vent on the back below it if possible and/or
> make that access door in front a vent.

Directly below the grill head is sealed. Its only for storage. No
vents.

Only the left and right sides are open to propane flow from the tank
and/or the grill head.