25 Litre Fermenter with Tap - But NO Airlock?
 

Hello

I have recently bought a couple of 25 Litre Fermenters with tap and
lid:

http://www.easybrew.co.uk/product_de... 2515079b8347

When I opened them I have noticed that there is no hole in the lid for
an airlock (which I have used in smaller fermenting buckets). Is this
normal? Do I not need an airlock for a 30 bottle wine kit?

Many thanks in advance.

E

25 Litre Fermenter with Tap - But NO Airlock?
 

>
> When I opened them I have noticed that there is no hole in the lid for
> an airlock (which I have used in smaller fermenting buckets). Is this
> normal? Do I not need an airlock for a 30 bottle wine kit?

Yes, for roughly each part alcohol you create you create a part of
CO2, it's a lot of gas.

Maybe they expect you to leave the lid on loosely? It's not a good
plan but it's better than the top blowing off.

I have seen lids with a small rubber vent; when I buy juice they come
like that. Does your lid have that? If so, just make sure it does
not plug up and you should be OK. Otherwise I might drill a hole in
that lid and fit it with an airlock. If you have access to cork
borers they make a nice clean hole.


Joe

25 Litre Fermenter with Tap - But NO Airlock?
 

> wrote:

> I have recently bought a couple of 25 Litre Fermenters
> with tap and lid:

By "tap", do you mean "pail"?
Too bad they are in the UK or I get a couple too.

> http://www.easybrew.co.uk/product_de... 2515079b8347

Life is easier with tinyurl!
http://tinyurl.com/2e6evj

> When I opened them I have noticed that there is
> no hole in the lid for an airlock (which I have
> used in smaller fermenting buckets). Is this normal?

If you go to their equipment page and select
"Fermenter Spares", they sell a lid with an
"O" ring!

> Do I not need an airlock for a 30 bottle wine kit?

Get an "O" ring, drill the correct size hole,
debur the hole, and insert the "O" ring. Don't
give the *******s the satisfaction of paying
for two lids.

I hope their prices are in Euros, not Pounds!

Dick

25 Litre Fermenter with Tap - But NO Airlock?
 

A cheap 1" -1.5" wood bit should do the trick easily.
http://www.toolstation.com/images/li...bbig/37995.jpg
should be about 3 bucks at the hardware store. I wouldn't worry about an
o-ring as a rubber bung should seal just fine on it's own.

Cheers


> wrote in message
oups.com...
> Hello
>
> I have recently bought a couple of 25 Litre Fermenters with tap and
> lid:
>
> http://www.easybrew.co.uk/product_de... 2515079b8347
>
> When I opened them I have noticed that there is no hole in the lid for
> an airlock (which I have used in smaller fermenting buckets). Is this
> normal? Do I not need an airlock for a 30 bottle wine kit?
>
> Many thanks in advance.
>
> E
>

25 Litre Fermenter with Tap - But NO Airlock?
 

Many thanks for all your worthwhile comments! I have often found this
group helpful.

Indeed these prices ARE in pounds - given the five pound delivery
charge for all order - it makes the cost of buying two separate lids
with airlocks a . . . . . "**** take"!

Many thanks again guys.

E