FoodBanter.com

FoodBanter.com (https://www.foodbanter.com/)
-   Barbecue (https://www.foodbanter.com/barbecue/)
-   -   Hog Roaster Motor? (https://www.foodbanter.com/barbecue/19840-hog-roaster-motor.html)

ChuckM 19-02-2004 02:05 AM

Hog Roaster Motor?
 
I was wondering if anybody knows what tpye of gearmotor I need to run a
rotisserie on a hog roaster. What rpm, horsepower, or torque will I need.
Thanks



D 20-02-2004 01:42 AM

Hog Roaster Motor?
 
Well if your gonna do an entire hog then you will need something
a little more powerful than the average grill rotisserie motor that
you buy at the outlet house. Trouble is it's gonna be a little hard
to find anything in between for sale that's strong enough and yet
not overkill on power and price. Try calling some electric motor
shops local and ask if they have anything that will run at low rpm
for very long without overheating. Tell them exactly what you have
in mind. Actually any used washer or dryer motor would do it but
you'd have to use a "huge" pulley to gear it down enough to turn
slow. A friend of mine once ran a sugar cane mill with one of these
by running it thru a series of pulley step downs. Good luck with it.



Walt Lewis 24-02-2004 08:57 PM

Hog Roaster Motor?
 
I've hear that a motor from a grocery store check out conveyer is
PERFECT. Strong, small and geared well.

Walt

On Thu, 19 Feb 2004 20:42:20 -0500, "D" [email protected] wrote:

Well if your gonna do an entire hog then you will need something
a little more powerful than the average grill rotisserie motor that
you buy at the outlet house. Trouble is it's gonna be a little hard
to find anything in between for sale that's strong enough and yet
not overkill on power and price. Try calling some electric motor
shops local and ask if they have anything that will run at low rpm
for very long without overheating. Tell them exactly what you have
in mind. Actually any used washer or dryer motor would do it but
you'd have to use a "huge" pulley to gear it down enough to turn
slow. A friend of mine once ran a sugar cane mill with one of these
by running it thru a series of pulley step downs. Good luck with it.




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Tyler Hopper 25-02-2004 05:41 PM

Hog Roaster Motor?
 

"D" [email protected] wrote in message ...
Well if your gonna do an entire hog then you will need something
a little more powerful than the average grill rotisserie motor that
you buy at the outlet house. Trouble is it's gonna be a little hard
to find anything in between for sale that's strong enough and yet
not overkill on power and price. Try calling some electric motor
shops local and ask if they have anything that will run at low rpm
for very long without overheating. Tell them exactly what you have
in mind. Actually any used washer or dryer motor would do it but
you'd have to use a "huge" pulley to gear it down enough to turn
slow. A friend of mine once ran a sugar cane mill with one of these
by running it thru a series of pulley step downs. Good luck with it.



www.emotorstore.com



butch burton 25-02-2004 05:45 PM

Hog Roaster Motor?
 
Walt Lewis wrote in message . ..
I've hear that a motor from a grocery store check out conveyer is
PERFECT. Strong, small and geared well.

Walt

On Thu, 19 Feb 2004 20:42:20 -0500, "D" [email protected] wrote:

Well if your gonna do an entire hog then you will need something
a little more powerful than the average grill rotisserie motor that
you buy at the outlet house. Trouble is it's gonna be a little hard
to find anything in between for sale that's strong enough and yet
not overkill on power and price. Try calling some electric motor
shops local and ask if they have anything that will run at low rpm
for very long without overheating. Tell them exactly what you have
in mind. Actually any used washer or dryer motor would do it but
you'd have to use a "huge" pulley to gear it down enough to turn
slow. A friend of mine once ran a sugar cane mill with one of these
by running it thru a series of pulley step downs. Good luck with it.




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----


First of all decide on RPM-have observed several different roaster
spits for RPM and most range from 1 to 5 RPM. Also most are chain
driven-belts don't like heat but will work if you can keep the belt
far enough away from the heat. Next you have to figure out what size
critter you will roast. Most people roast "hogs" in the 80-100#
range-Germans say it has got to be under 80# to be called Spahnferkle.
Don't think you want to roast 500# hogs. I would think a gear motor
that can be reduced in speed to the 1-5 RPM area with at least 150"
pounds of torque would do the job. There is a place called Surplus
Center in Lincoln NB, www.surpluscenter.com and they have lots of used
and new gearmotors for sale. Got a 30 rpm 135" pound gearmotor for a
coffee roaster from them for about $40 and it works great. They no
longer feature this gearmotor in their catalog but may have a few in
stock. It would be great caused reduced down to 5 rpm or less would
have plenty of torque-assuming you have decent bearings on the shaft.
They also have pillow blocks.

What do you plan to make your roaster from-some local farmers make
them out of 250 gallon oval heating oil tanks - hang a firebox on one
end and it is a smoker-roaster.


All times are GMT +1. The time now is 12:18 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
FoodBanter