A Food and drink forum. FoodBanter.com

Welcome to FoodBanter.com forums which provide access to the finest food and drink related newsgroups.

You are currently viewing our boards as a guest which gives you limited access to view most newsgroup discussions and access our other FREE features. By joining our free community you will have access to post topics to the food related newsgroups, communicate privately with other FoodBanter.com members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact support.

Go Back   Home » FoodBanter.com forum » Drinking » Winemaking
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Winemaking (rec.crafts.winemaking) Discussion of the process, recipes, tips, techniques and general exchange of lore on the process, methods and history of wine making. Includes traditional grape wines, sparkling wines & champagnes.

carboy purging



 
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 02-03-2005, 01:35 AM
treetoad
Usenet poster
 
Posts: n/a
Default carboy purging

READ IN A BOOK ABOUT THE DESIRE TO KEEP AIR AWAY FROM WHITE WINES
DURING RACKING AS MUCH AS POSSIBLE TO AVOID OXIDATION.THE AUTHOR USED A
BOTTLE OF ARGON W/REGULATOR TO PURGE RECIEVING CARBOYS FIRST,THEN
INTRODUCE THE GAS TO THE TOP OF THE CARBOY HE WAS SIPHONING OUT OF
DURING THE RACKING(VERY LOW PRESSURE ABOVE THE WINE).ARGON IS
EXPENSIVE...........CAN I USE CO2 FOR THE SAME THING?IT'S
ODORLESS,ETC,AND I WOULDN'T BE BUBBLING IT THROUGH THE WINE OR
ANYTHING,JUST PURGING.I'D APPRECIATE ANY THOUGHTS/OPINIONS.

  #2 (permalink)  
Old 02-03-2005, 02:14 AM
Gerald Todd
Usenet poster
 
Posts: n/a
Default


"treetoad" wrote in message
ups.com...
READ IN A BOOK ABOUT THE DESIRE TO KEEP AIR AWAY FROM WHITE WINES
DURING RACKING AS MUCH AS POSSIBLE TO AVOID OXIDATION.THE AUTHOR USED A
BOTTLE OF ARGON W/REGULATOR TO PURGE RECIEVING CARBOYS FIRST,THEN
INTRODUCE THE GAS TO THE TOP OF THE CARBOY HE WAS SIPHONING OUT OF
DURING THE RACKING(VERY LOW PRESSURE ABOVE THE WINE).ARGON IS
EXPENSIVE...........CAN I USE CO2 FOR THE SAME THING?IT'S
ODORLESS,ETC,AND I WOULDN'T BE BUBBLING IT THROUGH THE WINE OR
ANYTHING,JUST PURGING.I'D APPRECIATE ANY THOUGHTS/OPINIONS.


I'm doing this with a Hurricane Quick Shot CO2 inflator (sold through bike
shops). It was about $9.50 and 12 gram cartridges are about $12 for 25 at
Walmart. I drilled a hole in the fid of my primary fermenter (bucket) and
put a tire valve stem in it. When racking into a carboy I use 4 straws
taped together and squirt the CO2 in as close to the bottom as I can without
compromising sterility. Does it do any good? Maybe, maybe not. I'm new to
this and it seemed a cheap way to help optimize conditions.

Gerald
Todd


  #3 (permalink)  
Old 02-03-2005, 04:04 AM
Rob
Usenet poster
 
Posts: n/a
Default

CO2 can be used, as long as you don't hold it under pressure, and as
long as there's little head-space remaining after racking. You can
carbonate the wine if you aren't careful, and that's why they use inert
gasses like argon or nitrogen instead.

Rob

  #4 (permalink)  
Old 02-03-2005, 12:35 PM
Joe Sallustio
Usenet poster
 
Posts: n/a
Default

Topping and airlock maintenance are cheaper and very effective. Just
top your wine to withing 1/2" of the neck and cover it up weith an
airlock or stopper if it's still and the temperature will remain the
same.

You can do the CO2 thing, but normally you bubble gas through a
dispersion tube into the wine. The inert gases make much more sense
than CO2 as Rob stated. Just a heads up, there are different levels of
quality (grades) for gases, I'm not sure I would use just any source.
It may be worthwile to contact the manufacturer to be on the safe side
when using it for food.

Joe

  #5 (permalink)  
Old 02-03-2005, 10:11 PM
Gerald Todd
Usenet poster
 
Posts: n/a
Default


"Joe Sallustio" wrote in message
oups.com...
Topping and airlock maintenance are cheaper and very effective. Just
top your wine to withing 1/2" of the neck and cover it up weith an
airlock or stopper if it's still and the temperature will remain the
same.

You can do the CO2 thing, but normally you bubble gas through a
dispersion tube into the wine. The inert gases make much more sense
than CO2 as Rob stated. Just a heads up, there are different levels of
quality (grades) for gases, I'm not sure I would use just any source.
It may be worthwile to contact the manufacturer to be on the safe side
when using it for food.

Joe


Points well taken. Thanks

Gerald
Todd


  #6 (permalink)  
Old 02-03-2005, 10:11 PM
Gerald Todd
Usenet poster
 
Posts: n/a
Default


"Joe Sallustio" wrote in message
oups.com...
Topping and airlock maintenance are cheaper and very effective. Just
top your wine to withing 1/2" of the neck and cover it up weith an
airlock or stopper if it's still and the temperature will remain the
same.

You can do the CO2 thing, but normally you bubble gas through a
dispersion tube into the wine. The inert gases make much more sense
than CO2 as Rob stated. Just a heads up, there are different levels of
quality (grades) for gases, I'm not sure I would use just any source.
It may be worthwile to contact the manufacturer to be on the safe side
when using it for food.

Joe


Points well taken. Thanks

Gerald
Todd


  #7 (permalink)  
Old 08-03-2005, 02:05 AM
doublesb@hotmail.com
Usenet poster
 
Posts: n/a
Default

Todd,

If you want my 2 cents, I agree with Joe. If your just starting out
don't worry about the CO2 or Argon. Actually, even if your not just
starting out inert gas is a luxury which from my experience is
unnecessary. My problem has been that the CO2 from the ferment isn't
totally gone from the wine when I'm about to bottle. It's actually kind
of comforting to know that there is still CO2 in the wine which means
that it was well protected from oxygen. Even if you make white wines if
you top up and make sure the airlocks are on tight and they are filled
with meta solution your wines will turn out fine. Don;'t worry and have
fun.

Bob

 




Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
carboy size (and source?) Dr. Richard E. Hawkins Winemaking 11 19-03-2004 04:04 PM
Carboy and Sunlight Ken Anderson Winemaking 6 17-03-2004 01:36 PM
kit wine aging in carboy Joe Winemaking 6 09-03-2004 02:12 AM
Question on cutting corners Mike Winemaking 1 29-10-2003 07:10 PM
Carboy Cap vs. bung Dave Winemaking 2 23-10-2003 06:12 AM

fitness forum |
All times are GMT +1. The time now is 05:34 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.Search Engine Friendly URLs by vBSEO 3.0.0 RC6
Copyright ©2004-2008 FoodBanter.com, part of the NewsgroupBanter project.
The comments are property of their posters.
New York Hotel - Credit Reports - Loans - Myspace Unblocker - News