General Cooking (rec.food.cooking) For general food and cooking discussion. Foods of all kinds, food procurement, cooking methods and techniques, eating, etc.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 54
Default Seasoning cast iron pans using Flaxseed oil

AKA Linseed oil..... Flaxseed is the 'food grade' version..............


http://sherylcanter.com/wordpress/20...technique-for-
seasoning-cast-iron/



Chemistry of Cast Iron Seasoning: A Science-Based How-To
January 28, 2010, 6:31 pm

The post after this one on “black rust” describes why you should heat the
pan before applying oil for seasoning. This helps the seasoning to adhere
and makes the pan pleasantly black.

http://sherylcanter.com/wordpress/20...and-cast-iron-
seasoning/

In a previous post, I illustrated how I cleaned and reseasoned an antique
cast iron popover pan. This was my first attempt, and my seasoning
technique was somewhat haphazard because I couldn’t find consistent,
science-based advice. I used a combination of organic avocado oil and
strained drippings from organic bacon. This worked pretty well on the
popover pan, which doesn’t have a polished surface. But the smooth inner
surface of a skillet showed an unevenness of color and texture, and the
seasoning wasn’t hard enough. It was too easily marred by cooking utensils
or scraping against oven racks.

I wanted to understand the chemistry behind seasoning so I’d know how to
fix this, but there is nothing that addresses this issue directly. A Web
page on cast iron posted by someone similarly obsessed with the science
gave me two crucial clues, the phrases “polymerized fat” and “drying oil”.
From there I was able to find the relevant scientific literature and put
the pieces together.

The pictures below are both of the same antique cast iron skillet. The
“before” close-up on the left is from a picture of the skillet in my
previous blog post on making German Pancakes. I stripped the pan with oven
cleaner and reseasoned it based on my new understanding. The “after”
close-up on the right shows the result.
Griswold skillet closeups: old seasoning on left, new seasoning on right

Griswold skillet closeups: old seasoning on left, new seasoning on right

Start With the Right Oil (It’s Not What You Think)

I’ve read dozens of Web pages on how to season cast iron, and there is no
consensus in the advice. Some say vegetable oils leave a sticky surface
and to only use lard. Some say animal fat gives a surface that is too soft
and to only use vegetable oils. Some say corn oil is the only fat to use,
or Crisco, or olive oil. Some recommend bacon drippings since lard is no
longer readily available. Some say you must use a saturated fat – that is,
a fat that is solid at room temperature, whether it’s animal or vegetable
(palm oil, coconut oil, Crisco, lard). Some say never use butter. Some say
butter is fine. Some swear by Pam (spray-on canola oil with additives).
Some say the additives in Pam leave a residue at high temperatures and
pure canola oil is best. Some say it doesn’t matter what oil you use.

They are all wrong. It does matter what oil you use, and the oil that
gives the best results is not in this list. So what is it? Here are some
hints: What oil do artists mix with pigment for a high quality oil paint
that dries hard and glassy on the canvas? What oil is commonly used by
woodturners to give their sculptures a protective, soft-sheen finish? It’s
the same oil. Now what is the food-grade equivalent of this oil?

The oil used by artists and woodturners is linseed oil. The food-grade
equivalent is called flaxseed oil. This oil is ideal for seasoning cast
iron for the same reason it’s an ideal base for oil paint and wood
finishes. It’s a “drying oil”, which means it can transform into a hard,
tough film. This doesn’t happen through “drying” in the sense of losing
moisture through evaporation. The term is actually a misnomer. The
transformation is through a chemical process called “polymerization”.

The seasoning on cast iron is formed by fat polymerization, fat
polymerization is maximized with a drying oil, and flaxseed oil is the
only drying oil that’s edible. From that I deduced that flaxseed oil would
be the ideal oil for seasoning cast iron.

As a reality check of this theory, I googled “season cast iron with
flaxseed oil” to see what came up. The very first hit is a page written by
a guy who seasons his cast iron cookware with linseed oil from the
hardware store because it gives the hardest surface of anything he’s
tried. (I’m not sure how safe that is; I don’t recommend it.) Below that
were several sites selling traditional cast iron cookware from China,
which they advertise as being “preseasoned with high quality flax oil”. I
don’t know whether they really use food-grade flaxseed oil (which is
expensive) or linseed oil from a hardware store. What’s significant is the
claim. Seasoning with high quality flaxseed oil is something to brag
about.

With this encouragement, I stripped one of my skillets and reseasoned it
with flaxseed oil. As you can see in the picture above, the result was a
dramatic improvement. The finish is smooth, hard, and evenly colored.
Seasoning Is Not Cooking: Different Principles Apply

The first time I seasoned a pan I chose avocado oil because it’s
monounsaturated and doesn’t easily go rancid. It also has the highest
smoke point of any edible oil, 520°F, so I could heat it in a 450°F oven
without passing the smoke point. I knew that when cooking, you should
never heat an oil past its smoke point because that causes the release of
“free radicals”, which are carcinogenic. I was careful not to choose a
polyunsaturated oil – and especially not an oil high in omega-3 fatty
acids – because these are especially vulnerable to breakdown with heat and
the release of free radicals.

Ironically, it’s for exactly these reasons that the best oil for seasoning
cast iron is an oil high in omega-3 fatty acids – in particular, alpha-
linolenic acid (ALA). Free radicals are actually what enable the
polymerization. Drying oils, which produce the hardest polymers, are
characterized by high levels of polyunsaturated fatty acids, especially
the omega-3 fatty acid ALA.

The lard that was traditionally used for seasoning 100 years ago was much
higher in ALA than fat from pigs today, because back then pigs ate their
natural diet. Today they are raised on industrial feedlots and forced to
eat grain, making their fat low in omega-3s.

Since lard is traditional but no longer readily available, many people
substitute bacon drippings, but this is a bad idea. If it’s conventional
bacon, you’re baking in carcinogenic nitrates. But even organic bacon is
not good for an initial seasoning because it’s filled with salt.

The reason that Pam seems to work well in seasoning is that its main
ingredient is canola oil, which is relatively high in ALA (10%), making it
a “semi-drying oil”. Flaxseed oil, a drying oil, is 57% ALA. But it’s not
a good idea to use a spray oil, no matter what oil it’s made with, because
of its additives. You’re doing chemistry here. If you want good results,
use pure ingredients.

Fat polymerization can be triggered or accelerated in a variety of ways.
As best I can tell from my reading, the cast iron seasoning process is an
example of “radical polymerization”. The process is initiated when
something causes the release of free radicals in the oil. The free
radicals then “crosslink” to form the tough, hard film you see in a well-
seasoned pan.

So what is the “something” that initiates the release of free radicals in
fat? Iron, for one thing. High heat, light, and oxygen, for some others.
To prevent cooking oils from going rancid – i.e., breaking down and
releasing free radicals – you need to store them in dark, tightly sealed
containers in a cool location. To initiate or accelerate the release of
free radicals, put the oil in contact with bare iron and heat it above its
smoke point, which will cause even non-drying oils to release free
radicals.

I haven’t defined “free radical” or “crosslink” because that gets into
details of chemistry that you don’t need to understand to season a cast
iron pan. All you need to know is that the molecular structure of the oil
changes and becomes something else, something tough and solid. The process
is initiated with the release of free radicals, which then become
crosslinked, creating a hard surface.

Free radicals are carcinogenic inside your body, and also a cause of
aging. So don’t ever heat oil you’re going to eat above its smoke point.
If the oil starts to smoke, toss it out and start again. When you’re
seasoning a pan, you’re not cooking food. By the time the seasoned pan
comes out of the oven, there are no more free radicals.
The Recipe for Perfect Cast Iron Seasoning

The basic idea is this: Smear a food-grade drying oil onto a cast iron
pan, and then bake it above the oil’s smoke point. This will initiate the
release of free radicals and polymerization. The more drying the oil, the
harder the polymer. So start with the right oil.

Go to your local health food store or organic grocery and buy a bottle of
flaxseed oil. It’s sold as an omega-3 supplement and it’s in the
refrigeration section because it goes rancid so easily. Check the
expiration date to make sure it’s not already rancid. Buy an organic
flaxseed oil. You don’t want to burn toxic chemicals into your cookware to
leach out forever more. It’s a fairly expensive oil. I paid $17 for a 17
ounce bottle of cold-pressed, unrefined, organic flaxseed oil. As it says
on the bottle, shake it before you use it.

Strip your pan down to the iron using the techniques I describe in my
popover post. Heat the pan in a 200°F oven to be sure it’s bone dry and to
open the pores of the iron a little. Then put it on a paper towel, pour a
little flaxseed oil on it (don’t forget to shake the bottle), and rub the
oil all over the pan with your hands, making sure to get into every nook
and cranny. Your hands and the pan will be nice and oily.

Now rub it all off. Yup – all. All. Rub it off with paper towels or a
cotton cloth until it looks like there is nothing left on the surface.
There actually is oil left on the surface, it’s just very thin. The pan
should look dry, not glistening with oil. Put the pan upside down in a
cold oven. Most instructions say to put aluminum foil under it to catch
any drips, but if your oil coating is as thin as it should be, there won’t
be any drips.

Turn the oven to a baking temperature of 500°F (or as high as your oven
goes – mine only goes to 450°F) and let the pan preheat with the oven.
When it reaches temperature, set the timer for an hour. After an hour,
turn off the oven but do not open the oven door. Let it cool off with the
pan inside for two hours, at which point it’s cool enough to handle.

The pan will come out of the oven a little darker, but matte in texture –
not the semi-gloss you’re aiming for. It needs more coats. In fact, it
needs at least six coats. So again rub on the oil, wipe it off, put it in
the cold oven, let it preheat, bake for an hour, and let it cool in the
oven for two hours. The picture above was taken after six coats of
seasoning. At that point it starts to develop a bit of a sheen and the pan
is ready for use.

If you try this, you will be tempted to use a thicker coat of oil to speed
up the process. Don’t do it. It just gets you an uneven surface – or
worse, baked on drips. Been there, done that. You can’t speed up the
process. If you try, you’ll mess up the pan and have to start over.

The reason for the very hot oven is to be sure the temperature is above
the oil’s smoke point, and to maximally accelerate the release of free
radicals. Unrefined flaxseed oil actually has the lowest smoke point of
any oil (see this table). But the higher the temperature the more it will
smoke, and that’s good for seasoning (though bad for eating – do not let
oils smoke during cooking).

I mentioned earlier there’s a myth floating around that vegetable oils
leave a sticky residue. If the pan comes out of the oven sticky, the cause
is one of three things:

* You put the oil on too thick.
* Your oven temperature was too low.
* Your baking time was too short.

It’s possible to use a suboptimal oil for seasoning, like Crisco or bacon
drippings, and still end up with a usable pan. Many (most) people do this.
But the seasoning will be relatively soft, not as nonstick, and will tend
to wear off. If you want the hardest, slickest seasoning possible, use the
right oil: flaxseed oil.

--
Peter Lucas
Hobart
Tasmania


A good friend would drive 30 miles at 2:00 am to bail you out of jail.
A best friend, however, would be sitting in the cell next to you saying
"Man, that was f******n Awesome!"
  #2 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 4,555
Default Seasoning cast iron pans using Flaxseed oil

On 12/13/2010 10:06 PM, Aussie1 wrote:
> AKA Linseed oil..... Flaxseed is the 'food grade' version..............
>
>
> http://sherylcanter.com/wordpress/20...ing-cast-iron/
>
>
> Chemistry of Cast Iron Seasoning: A Science-Based How-To
> January 28, 2010, 6:31 pm
>
> The post after this one on “black rust” describes why you should heat the
> pan before applying oil for seasoning. This helps the seasoning to adhere
> and makes the pan pleasantly black.
>
> http://sherylcanter.com/wordpress/20...ron-seasoning/
>



Raw linseed oil from the hardware store is probably fine even tho' it is
not food-grade. Do not use "boiled" linseed oil because it has driers
added, which probably means heavy metal salts.

Bob
  #3 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 17
Default Seasoning cast iron pans using Flaxseed oil


"Aussie1" > wrote in message
5...
> AKA Linseed oil..... Flaxseed is the 'food grade' version..............
>
>
> http://sherylcanter.com/wordpress/20...technique-for-
> seasoning-cast-iron/
>
>
>
> Chemistry of Cast Iron Seasoning: A Science-Based How-To
> January 28, 2010, 6:31 pm
>
> The post after this one on "black rust" describes why you should heat the
> pan before applying oil for seasoning. This helps the seasoning to adhere
> and makes the pan pleasantly black.
>
> http://sherylcanter.com/wordpress/20...and-cast-iron-
> seasoning/
>
> In a previous post, I illustrated how I cleaned and reseasoned an antique
> cast iron popover pan. This was my first attempt, and my seasoning
> technique was somewhat haphazard because I couldn't find consistent,
> science-based advice. I used a combination of organic avocado oil and
> strained drippings from organic bacon. This worked pretty well on the
> popover pan, which doesn't have a polished surface. But the smooth inner
> surface of a skillet showed an unevenness of color and texture, and the
> seasoning wasn't hard enough. It was too easily marred by cooking utensils
> or scraping against oven racks.
>
> I wanted to understand the chemistry behind seasoning so I'd know how to
> fix this, but there is nothing that addresses this issue directly. A Web
> page on cast iron posted by someone similarly obsessed with the science
> gave me two crucial clues, the phrases "polymerized fat" and "drying oil".
> From there I was able to find the relevant scientific literature and put
> the pieces together.
>
> The pictures below are both of the same antique cast iron skillet. The
> "before" close-up on the left is from a picture of the skillet in my
> previous blog post on making German Pancakes. I stripped the pan with oven
> cleaner and reseasoned it based on my new understanding. The "after"
> close-up on the right shows the result.
> Griswold skillet closeups: old seasoning on left, new seasoning on right
>
> Griswold skillet closeups: old seasoning on left, new seasoning on right
>
> Start With the Right Oil (It's Not What You Think)
>
> I've read dozens of Web pages on how to season cast iron, and there is no
> consensus in the advice. Some say vegetable oils leave a sticky surface
> and to only use lard. Some say animal fat gives a surface that is too soft
> and to only use vegetable oils. Some say corn oil is the only fat to use,
> or Crisco, or olive oil. Some recommend bacon drippings since lard is no
> longer readily available. Some say you must use a saturated fat - that is,
> a fat that is solid at room temperature, whether it's animal or vegetable
> (palm oil, coconut oil, Crisco, lard). Some say never use butter. Some say
> butter is fine. Some swear by Pam (spray-on canola oil with additives).
> Some say the additives in Pam leave a residue at high temperatures and
> pure canola oil is best. Some say it doesn't matter what oil you use.
>
> They are all wrong. It does matter what oil you use, and the oil that
> gives the best results is not in this list. So what is it? Here are some
> hints: What oil do artists mix with pigment for a high quality oil paint
> that dries hard and glassy on the canvas? What oil is commonly used by
> woodturners to give their sculptures a protective, soft-sheen finish? It's
> the same oil. Now what is the food-grade equivalent of this oil?
>
> The oil used by artists and woodturners is linseed oil. The food-grade
> equivalent is called flaxseed oil. This oil is ideal for seasoning cast
> iron for the same reason it's an ideal base for oil paint and wood
> finishes. It's a "drying oil", which means it can transform into a hard,
> tough film. This doesn't happen through "drying" in the sense of losing
> moisture through evaporation. The term is actually a misnomer. The
> transformation is through a chemical process called "polymerization".
>
> The seasoning on cast iron is formed by fat polymerization, fat
> polymerization is maximized with a drying oil, and flaxseed oil is the
> only drying oil that's edible. From that I deduced that flaxseed oil would
> be the ideal oil for seasoning cast iron.
>
> As a reality check of this theory, I googled "season cast iron with
> flaxseed oil" to see what came up. The very first hit is a page written by
> a guy who seasons his cast iron cookware with linseed oil from the
> hardware store because it gives the hardest surface of anything he's
> tried. (I'm not sure how safe that is; I don't recommend it.) Below that
> were several sites selling traditional cast iron cookware from China,
> which they advertise as being "preseasoned with high quality flax oil". I
> don't know whether they really use food-grade flaxseed oil (which is
> expensive) or linseed oil from a hardware store. What's significant is the
> claim. Seasoning with high quality flaxseed oil is something to brag
> about.
>
> With this encouragement, I stripped one of my skillets and reseasoned it
> with flaxseed oil. As you can see in the picture above, the result was a
> dramatic improvement. The finish is smooth, hard, and evenly colored.
> Seasoning Is Not Cooking: Different Principles Apply
>
> The first time I seasoned a pan I chose avocado oil because it's
> monounsaturated and doesn't easily go rancid. It also has the highest
> smoke point of any edible oil, 520°F, so I could heat it in a 450°F oven
> without passing the smoke point. I knew that when cooking, you should
> never heat an oil past its smoke point because that causes the release of
> "free radicals", which are carcinogenic. I was careful not to choose a
> polyunsaturated oil - and especially not an oil high in omega-3 fatty
> acids - because these are especially vulnerable to breakdown with heat and
> the release of free radicals.
>
> Ironically, it's for exactly these reasons that the best oil for seasoning
> cast iron is an oil high in omega-3 fatty acids - in particular, alpha-
> linolenic acid (ALA). Free radicals are actually what enable the
> polymerization. Drying oils, which produce the hardest polymers, are
> characterized by high levels of polyunsaturated fatty acids, especially
> the omega-3 fatty acid ALA.
>
> The lard that was traditionally used for seasoning 100 years ago was much
> higher in ALA than fat from pigs today, because back then pigs ate their
> natural diet. Today they are raised on industrial feedlots and forced to
> eat grain, making their fat low in omega-3s.
>
> Since lard is traditional but no longer readily available, many people
> substitute bacon drippings, but this is a bad idea. If it's conventional
> bacon, you're baking in carcinogenic nitrates. But even organic bacon is
> not good for an initial seasoning because it's filled with salt.
>
> The reason that Pam seems to work well in seasoning is that its main
> ingredient is canola oil, which is relatively high in ALA (10%), making it
> a "semi-drying oil". Flaxseed oil, a drying oil, is 57% ALA. But it's not
> a good idea to use a spray oil, no matter what oil it's made with, because
> of its additives. You're doing chemistry here. If you want good results,
> use pure ingredients.
>
> Fat polymerization can be triggered or accelerated in a variety of ways.
> As best I can tell from my reading, the cast iron seasoning process is an
> example of "radical polymerization". The process is initiated when
> something causes the release of free radicals in the oil. The free
> radicals then "crosslink" to form the tough, hard film you see in a well-
> seasoned pan.
>
> So what is the "something" that initiates the release of free radicals in
> fat? Iron, for one thing. High heat, light, and oxygen, for some others.
> To prevent cooking oils from going rancid - i.e., breaking down and
> releasing free radicals - you need to store them in dark, tightly sealed
> containers in a cool location. To initiate or accelerate the release of
> free radicals, put the oil in contact with bare iron and heat it above its
> smoke point, which will cause even non-drying oils to release free
> radicals.
>
> I haven't defined "free radical" or "crosslink" because that gets into
> details of chemistry that you don't need to understand to season a cast
> iron pan. All you need to know is that the molecular structure of the oil
> changes and becomes something else, something tough and solid. The process
> is initiated with the release of free radicals, which then become
> crosslinked, creating a hard surface.
>
> Free radicals are carcinogenic inside your body, and also a cause of
> aging. So don't ever heat oil you're going to eat above its smoke point.
> If the oil starts to smoke, toss it out and start again. When you're
> seasoning a pan, you're not cooking food. By the time the seasoned pan
> comes out of the oven, there are no more free radicals.
> The Recipe for Perfect Cast Iron Seasoning
>
> The basic idea is this: Smear a food-grade drying oil onto a cast iron
> pan, and then bake it above the oil's smoke point. This will initiate the
> release of free radicals and polymerization. The more drying the oil, the
> harder the polymer. So start with the right oil.
>
> Go to your local health food store or organic grocery and buy a bottle of
> flaxseed oil. It's sold as an omega-3 supplement and it's in the
> refrigeration section because it goes rancid so easily. Check the
> expiration date to make sure it's not already rancid. Buy an organic
> flaxseed oil. You don't want to burn toxic chemicals into your cookware to
> leach out forever more. It's a fairly expensive oil. I paid $17 for a 17
> ounce bottle of cold-pressed, unrefined, organic flaxseed oil. As it says
> on the bottle, shake it before you use it.
>
> Strip your pan down to the iron using the techniques I describe in my
> popover post. Heat the pan in a 200°F oven to be sure it's bone dry and to
> open the pores of the iron a little. Then put it on a paper towel, pour a
> little flaxseed oil on it (don't forget to shake the bottle), and rub the
> oil all over the pan with your hands, making sure to get into every nook
> and cranny. Your hands and the pan will be nice and oily.
>
> Now rub it all off. Yup - all. All. Rub it off with paper towels or a
> cotton cloth until it looks like there is nothing left on the surface.
> There actually is oil left on the surface, it's just very thin. The pan
> should look dry, not glistening with oil. Put the pan upside down in a
> cold oven. Most instructions say to put aluminum foil under it to catch
> any drips, but if your oil coating is as thin as it should be, there won't
> be any drips.
>
> Turn the oven to a baking temperature of 500°F (or as high as your oven
> goes - mine only goes to 450°F) and let the pan preheat with the oven.
> When it reaches temperature, set the timer for an hour. After an hour,
> turn off the oven but do not open the oven door. Let it cool off with the
> pan inside for two hours, at which point it's cool enough to handle.
>
> The pan will come out of the oven a little darker, but matte in texture -
> not the semi-gloss you're aiming for. It needs more coats. In fact, it
> needs at least six coats. So again rub on the oil, wipe it off, put it in
> the cold oven, let it preheat, bake for an hour, and let it cool in the
> oven for two hours. The picture above was taken after six coats of
> seasoning. At that point it starts to develop a bit of a sheen and the pan
> is ready for use.
>
> If you try this, you will be tempted to use a thicker coat of oil to speed
> up the process. Don't do it. It just gets you an uneven surface - or
> worse, baked on drips. Been there, done that. You can't speed up the
> process. If you try, you'll mess up the pan and have to start over.
>
> The reason for the very hot oven is to be sure the temperature is above
> the oil's smoke point, and to maximally accelerate the release of free
> radicals. Unrefined flaxseed oil actually has the lowest smoke point of
> any oil (see this table). But the higher the temperature the more it will
> smoke, and that's good for seasoning (though bad for eating - do not let
> oils smoke during cooking).
>
> I mentioned earlier there's a myth floating around that vegetable oils
> leave a sticky residue. If the pan comes out of the oven sticky, the cause
> is one of three things:
>
> * You put the oil on too thick.
> * Your oven temperature was too low.
> * Your baking time was too short.
>
> It's possible to use a suboptimal oil for seasoning, like Crisco or bacon
> drippings, and still end up with a usable pan. Many (most) people do this.
> But the seasoning will be relatively soft, not as nonstick, and will tend
> to wear off. If you want the hardest, slickest seasoning possible, use the
> right oil: flaxseed oil.
>
> --
> Peter Lucas
> Hobart
> Tasmania
>
>
> A good friend would drive 30 miles at 2:00 am to bail you out of jail.
> A best friend, however, would be sitting in the cell next to you saying
> "Man, that was f******n Awesome!"
>
>

This is the kind of incredible garbage that Christopher Kimball, publisher
of Cook's Illustrated, comes up with to stay in business.

Some of his is advice is good. Some of it, like using linseed oil to make
cast iron turn into a stable nonstick pan is absolute horseshit.

Kent





  #4 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 54
Default Seasoning cast iron pans using Flaxseed oil

"Kent" > wrote in -
september.org:

>
> "Aussie1" > wrote in message
> 5...
>> AKA Linseed oil..... Flaxseed is the 'food grade' version..............
>>
>>
>> http://sherylcanter.com/wordpress/20...sed-technique-

for-
>> seasoning-cast-iron/
>>
>>
>>
>> Chemistry of Cast Iron Seasoning: A Science-Based How-To
>> January 28, 2010, 6:31 pm
>>
>> The post after this one on "black rust" describes why you should heat

the
>> pan before applying oil for seasoning. This helps the seasoning to

adhere
>> and makes the pan pleasantly black.
>>
>> http://sherylcanter.com/wordpress/20...and-cast-iron-
>> seasoning/
>>
>> In a previous post, I illustrated how I cleaned and reseasoned an

antique
>> cast iron popover pan. This was my first attempt, and my seasoning
>> technique was somewhat haphazard because I couldn't find consistent,
>> science-based advice.



>>

> This is the kind of incredible garbage that Christopher Kimball,

publisher
> of Cook's Illustrated, comes up with to stay in business.
>
> Some of his is advice is good. Some of it, like using linseed oil to

make
> cast iron turn into a stable nonstick pan is absolute horseshit.
>





Would you care to show us all where the **** "Christopher Kimball" has got
anything at all to do with that website???


Or are you going to say Sheryl Canter is Kimball in drag??


http://sherylcanter.com/


You seem obsessed with Kimball.



--
Peter Lucas
Hobart
Tasmania


A good friend would drive 30 miles at 2:00 am to bail you out of jail.
A best friend, however, would be sitting in the cell next to you saying
"Man, that was f******n Awesome!"
  #5 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 1,627
Default Seasoning cast iron pans using Flaxseed oil

On Mon, 13 Dec 2010 23:34:14 -0800, Kent wrote:

> Some of his is advice is good. Some of it, like using linseed oil to make
> cast iron turn into a stable nonstick pan is absolute horseshit.


Well, gee, Kent. It seems they're right this time. No matter how
irritating PBTM can be, I would tend to trust him over on this
issue, rather than you unsubstantiated opinions.

Not that he had anything at all to do with the articles you're
quoting, mind you.

Have you tried it? Do you have any evidence that flaxseed oil
should *not* be used?

-sw


  #6 (permalink)   Report Post  
Posted to rec.food.cooking
external usenet poster
 
Posts: 236
Default Seasoning cast iron pans using Flaxseed oil

On Mon, 13 Dec 2010 23:34:14 -0800, "Kent" > wrote:

>This is the kind of incredible garbage that Christopher Kimball, publisher
>of Cook's Illustrated, comes up with to stay in business.
>
>Some of his is advice is good. Some of it, like using linseed oil to make
>cast iron turn into a stable nonstick pan is absolute horseshit.
>
>Kent
>


"...comes up with..."

CI heard of Canter's technique and tested it - they didn't come up
with it.

They reported that it worked as described. If you have issues with
Kimball, that's you problem. You OPINION about the technique is just
your opinion. They tested it.

- Mark
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Seasoning cast iron Mark A.Meggs General Cooking 18 25-12-2010 07:06 PM
Crisco for seasoning cast-iron pans Dee Dee Cooking Equipment 14 11-02-2007 05:07 PM
cast iron that needs no pre-seasoning Dimitri General Cooking 41 07-08-2005 03:19 AM
Seasoning a cast iron pan [email protected] General Cooking 23 27-04-2005 02:44 PM
Cast iron re-seasoning Elana Kehoe General Cooking 20 05-01-2004 01:41 AM


All times are GMT +1. The time now is 04:14 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 FoodBanter.com.
The comments are property of their posters.
 

About Us

"It's about Food and drink"