DCS Oven Calibration Screws...?
 

Howdy,

I have a DCS RD366L Range...

To calibrate the oven, I remove the temperature setting knob
to expose two holes each with an adjustment screw.

The inner screw is for the oven's calibration, but...

What is the outer screw for? (It seems related to the
calibration, but I can't figure out just what it does.)

Many thanks,
--
Kenneth

If you email... Please remove the "SPAMLESS."

DCS Oven Calibration Screws...?
 

One of the screws may adjust the pilot flame
I don't have that oven or any information on it
but just a guess
CC


"Kenneth" > wrote in message
...
>
> Howdy,
>
> I have a DCS RD366L Range...
>
> To calibrate the oven, I remove the temperature setting knob
> to expose two holes each with an adjustment screw.
>
> The inner screw is for the oven's calibration, but...
>
> What is the outer screw for? (It seems related to the
> calibration, but I can't figure out just what it does.)
>
> Many thanks,
> --
> Kenneth
>
> If you email... Please remove the "SPAMLESS."

DCS Oven Calibration Screws...?
 

On Thu, 19 Feb 2009 15:18:45 GMT, "CC"
> wrote:


>
>"Kenneth" > wrote in message
.. .
>>
>> Howdy,
>>
>> I have a DCS RD366L Range...
>>
>> To calibrate the oven, I remove the temperature setting knob
>> to expose two holes each with an adjustment screw.
>>
>> The inner screw is for the oven's calibration, but...
>>
>> What is the outer screw for? (It seems related to the
>> calibration, but I can't figure out just what it does.)
>>
>> Many thanks,
>> --
>> Kenneth
>>
>> If you email... Please remove the "SPAMLESS."

>One of the screws may adjust the pilot flame
>I don't have that oven or any information on it
>but just a guess
>CC
>

Hi again,

As it turns out, the outer screw adjusts the temperature of
the self-clean cycle...

All the best,
--
Kenneth

If you email... Please remove the "SPAMLESS."

DCS Oven Calibration Screws...?
 

"Kenneth" > wrote in message
...
> On Thu, 19 Feb 2009 15:18:45 GMT, "CC"
> > wrote:
>
>
>>
>>"Kenneth" > wrote in message
. ..
>>>
>>> Howdy,
>>>
>>> I have a DCS RD366L Range...
>>>
>>> To calibrate the oven, I remove the temperature setting knob
>>> to expose two holes each with an adjustment screw.
>>>
>>> The inner screw is for the oven's calibration, but...
>>>
>>> What is the outer screw for? (It seems related to the
>>> calibration, but I can't figure out just what it does.)
>>>
>>> Many thanks,
>>> --
>>> Kenneth
>>>
>>> If you email... Please remove the "SPAMLESS."
>
>>One of the screws may adjust the pilot flame
>>I don't have that oven or any information on it
>>but just a guess
>>CC
>>
>
> Hi again,
>
> As it turns out, the outer screw adjusts the temperature of
> the self-clean cycle...
>
> All the best,
> --
> Kenneth
>
> If you email... Please remove the "SPAMLESS."

I hadn't thought of that, thanks for the information
CC