Just bought a WSM and a slab of Baby Back ribs. Have lurked here and other
places trying to find the best way to start. Any suggestions?

Just bought a WSM and a slab of Baby Back ribs. Have lurked here and other
places trying to find the best way to start. Any suggestions?

Sure. Visit www.virtualweberbullet.com for a _ton_ of ideas.

Darius

JD wrote:
Just bought a WSM and a slab of Baby Back ribs. Have lurked here and
other places trying to find the best way to start. Any suggestions?

1. Throw away the recipe book
2. Throw away that stupid cover
3. Start cookin
--
-frohe
Life is too short to be in a hurry

---Use lump charcoal....not briquettes

---Allow extra time the first few times--to get used to it

---The Virtual Bullet site is great---Try using sand in the water pan....I
also have a new WSM. The first few cooks I used water---last weekend I did
an 8 lb. Pork Butt, and didn't want to worry about the water pan, so I
filled it 2/3 with sand, foiled it and cooked it for 13 hours--no worries !!
The pan isn't hard to clean, but no cleaning is better.

As someone mentioned in a previous post...while you have the smoker
going--fill it up!!
If I'm doing ribs, I'll throw 1-2 chickens on the lower grill (to freeze for
burritos), or some Turkey drumsticks for lunches....no sense wasting good
grill space! Today I'm doing some ribs...I got some tomatoes and a pile of
poblano peppers....so I'm going to make some smokey salsa for weekend
consumption.

---the AFB FAQ is a great resource also.....have fun

"JD" wrote in message
...
Just bought a WSM and a slab of Baby Back ribs. Have lurked here and
other
places trying to find the best way to start. Any suggestions?


Wait a minute? Is this THE JD, or is this some other JD with the same name?

--
Fosco Gamgee Whitfurrows
and his 6" boner

I guess it depends on your perspective, but if you know a JD then I would be
another one.

"F.G. Whitfurrows" wrote in message
...

"JD" wrote in message
...
Just bought a WSM and a slab of Baby Back ribs. Have lurked here and
other
places trying to find the best way to start. Any suggestions?


Wait a minute? Is this THE JD, or is this some other JD with the same
name?

--
Fosco Gamgee Whitfurrows
and his 6" boner

In ,
JD typed:
Just bought a WSM and a slab of Baby Back ribs. Have lurked here and other
places trying to find the best way to start. Any suggestions?

Start he
http://www.eaglequest.com/~bbq/faq2/toc.html
then go he
http://www.virtualweberbullet.com/

Oh, and unless you live in the Pacific Northwest, find another screen name.
That one is taken.

BOB

"Oncler" wrote in message
...
---Use lump charcoal....not briquettes

---Allow extra time the first few times--to get used to it

---The Virtual Bullet site is great---Try using sand in the water pan....I
also have a new WSM. The first few cooks I used water---last weekend I did
an 8 lb. Pork Butt, and didn't want to worry about the water pan, so I
filled it 2/3 with sand, foiled it and cooked it for 13 hours--no worries
!!
The pan isn't hard to clean, but no cleaning is better.

As someone mentioned in a previous post...while you have the smoker
going--fill it up!!
If I'm doing ribs, I'll throw 1-2 chickens on the lower grill (to freeze
for
burritos), or some Turkey drumsticks for lunches....no sense wasting good
grill space! Today I'm doing some ribs...I got some tomatoes and a pile of
poblano peppers....so I'm going to make some smokey salsa for weekend
consumption.

---the AFB FAQ is a great resource also.....have fun



I found some beer can chicken stands at wal-mart that are made of cheap
stainless steel. Instead of the beer I put a couple of scored lemons in each
beer can stand and I can put 3 chickens standing in the bottom and on the
top grill I put 6 racks of baby backs rolling them in a circle and secure
with a wooden skewer. I mop the ribs 10 minutes before taking them off with
a mixture of burbon and applejuice. Ribs are made with standard rubs and the
chicken is usually marinated.

Brad

Sorry, didn't know
" BOB" wrote in message
...
In ,
JD typed:
Just bought a WSM and a slab of Baby Back ribs. Have lurked here and
other
places trying to find the best way to start. Any suggestions?

Start he
http://www.eaglequest.com/~bbq/faq2/toc.html
then go he
http://www.virtualweberbullet.com/

Oh, and unless you live in the Pacific Northwest, find another screen
name.
That one is taken.

BOB

JVD typed:
" BOB" wrote...
In ,
JD typed:
Just bought a WSM and a slab of Baby Back ribs. Have lurked here and
other
places trying to find the best way to start. Any suggestions?

Start he
http://www.eaglequest.com/~bbq/faq2/toc.html
then go he
http://www.virtualweberbullet.com/

Oh, and unless you live in the Pacific Northwest, find another screen
name.
That one is taken.

BOB

Sorry, didn't know

You'll be much happier that way. ;)
How are those ribs doing?

BOB

Turned out OK, I think they could have been better. There is definately a
learning curve. Used lump for the first time, it's a little different to
handle than briquettes. The recipe I used called to keep the bottom vents
closed but the lump kept going out. Don't think I used enough to start.

" BOB" wrote in message
.. .
JVD typed:
" BOB" wrote...
In ,
JD typed:
Just bought a WSM and a slab of Baby Back ribs. Have lurked here and
other
places trying to find the best way to start. Any suggestions?

Start he
http://www.eaglequest.com/~bbq/faq2/toc.html
then go he
http://www.virtualweberbullet.com/

Oh, and unless you live in the Pacific Northwest, find another screen
name.
That one is taken.

BOB

Sorry, didn't know

You'll be much happier that way. ;)
How are those ribs doing?

BOB

JVD wrote:

Turned out OK, I think they could have been better. There is definately a
learning curve. Used lump for the first time, it's a little different to
handle than briquettes. The recipe I used called to keep the bottom vents
closed but the lump kept going out. Don't think I used enough to start.


Unless you used very little lump, having the fuel go out is due to lack
of oxygen. Open the top vent wide and use the bottom vent to control the
temperature.

Matthew

--
http://www.mlmartin.com/bbq/

Thermodynamics For Dummies: You can't win.
You can't break even.
You can't get out of the game.

JVD wrote:
Turned out OK, I think they could have been better. There is definately a
learning curve. Used lump for the first time, it's a little different to
handle than briquettes. The recipe I used called to keep the bottom vents
closed but the lump kept going out. Don't think I used enough to start.


Must have been driving you nuts having to continue getting the lump lit.
That is NOT supposed to happen with a WSM. Fire it up, add meat and go
about your business, checking once in a while and MAYBE make an adjustment.

My guess is because you had the bottom vents closed. They can be
partially closed, but not completely closed. And always have the top
vent completely open.

Happy Q'en

BBQ

JVD wrote:
Turned out OK, I think they could have been better. There is
definately a learning curve. Used lump for the first time, it's a
little different to handle than briquettes. The recipe I used
called to keep the bottom vents closed but the lump kept going out.
Don't think I used enough to start.



You need some air coming in from the bottom. I run mine with the top vent
open all the time. I have my base set so one vent is in the back (always
closed), and the other two are on the sides towards the front (sorta). I
find that keeping the two front vents open 1/4 - 1/3 of the way will keep
the lump cooking at 220-250 depending on conditions. I make sure the fire
ring is about 1/2 - 3/4 full of lump (mostly left from the last cook) , and
add a chimney full of lit lump on top........just shake the ash off the used
lump and dump on the lit stuff.

I think that's where I made my mistake, one I open up the vents the temp
stayed pegged at 250.

"bbq" wrote in message
. net...


JVD wrote:
Turned out OK, I think they could have been better. There is definately
a
learning curve. Used lump for the first time, it's a little different
to
handle than briquettes. The recipe I used called to keep the bottom
vents
closed but the lump kept going out. Don't think I used enough to start.


Must have been driving you nuts having to continue getting the lump lit.
That is NOT supposed to happen with a WSM. Fire it up, add meat and go
about your business, checking once in a while and MAYBE make an
adjustment.

My guess is because you had the bottom vents closed. They can be
partially closed, but not completely closed. And always have the top
vent completely open.

Happy Q'en

BBQ